Heated driveways, walkways, and patios. Engineered hydronic systems installed by master plumbers to keep your custom home ice-free all winter.
Tell us your project — a senior snowmelt specialist calls back inside 30 minutes with next steps.
A hydronic snowmelt system eliminates the seasonal damage that salt and mechanical plowing inflict on premium interlock, natural stone, and concrete surfaces. Heat is delivered from below — activated automatically by pavement sensors — so your driveway is clear before you leave for work, without lifting a shovel or calling a plow contractor.
Typical loop spacing on our driveways: 6–9″ — tighter under tire tracks.
From a 5,000 sq ft Kleinburg estate driveway to a Toronto walkway retrofit, every Perruzza snowmelt system is sized to the heat-loss model and detailed to the architectural finish.
Hydronic PEX loops embedded in concrete or asphalt driveways — sized to your square footage and local design temperature to clear snow in under 30 minutes.
Low-temperature glycol loops cast under interlock, flagstone, or concrete walkways — keeping front entries, steps, and landings ice-free all season.
Snowmelt loops under natural stone, porcelain, or concrete patios — extends your usable outdoor space into the winter months and protects premium materials from freeze-thaw damage.
Aerial- and pavement-mounted sensors detect snowfall and pavement temperature simultaneously — activating the system only when needed to minimize energy consumption.
Full mechanical-room integration — dedicated snowmelt boiler or shared plant with mixing valves, expansion tanks, and glycol-rated manifolds to code.
Complete property snowmelt design — driveway, apron, walkway, and patio in a single coordinated hydronic system with a unified boiler plant and zone controls.
From the first site walk to the seasonal glycol check, every Perruzza snowmelt project is delivered by fully licensed Mechanical Contractors — assessed, installed to code, and maintained for the long run.
We walk the property, review site plans and architectural drawings, then run a snowmelt heat-loss model — sizing every loop to your driveway dimensions, surface material, and local design temperature, not a generic template.
Every PEX loop, manifold, and boiler connection is installed to Ontario Building Code, TSSA, and CSA B214 standards by our licensed Mechanical Contractors — pressure-tested, glycol-filled, and inspection-ready.
After the first season our licensed team returns for glycol concentration checks, sensor calibration, and boiler tune-up — keeping your snowmelt system performing efficiently for decades, not just the first winter.
These are the design parameters we hit on a typical Vaughan or GTA estate snowmelt install — calibrated to the surface area, loop spacing, and the condensing boiler plant driving the system.
Discuss My ProjectBuilders, architects, and homeowners across the GTA pick Perruzza for snowmelt work because we don't cut corners on licensing, design engineering, or the craftsmanship a custom hydronic system requires.
Call 647-919-9619From Kleinburg estates and Woodbridge custom builds to Toronto retrofits and Richmond Hill new builds — Perruzza designs and installs snowmelt systems across the entire GTA.
2026 pricing, GTA permits, and energy efficiency — the three questions Vaughan and GTA homeowners ask us most often before committing to a hydronic snowmelt system.
Send us your project — surface area, materials, timeline — and a senior snowmelt specialist will call back inside 30 minutes with next steps for a Vaughan or GTA design-build.
Tell us your property address and project scope — we'll line up the right senior specialist for a Vaughan or GTA snowmelt consult.
